Ask A Question
 
johndoe
Junior Boarder
Blog Posts: 0
Forum Posts: 31
Rating: 1ApplaudCriticize
Posted 2 Years, 10 Months ago #1
Does anybody know of any software/hardware that will take the singers voice off a track so that you are left with just the backing track.

George. Liverpool.
The topic has been locked.
Angelus897
Junior Boarder
Blog Posts: 0
Forum Posts: 38
Rating: 0ApplaudCriticize
Posted 2 Years, 10 Months ago #2
I've seen that type of software advertised, but can't remember where. Since the vocal is usually centered in the stereo mix (equal on both left and right channel), It does it by reversing the phase on one channel and then 'adding' the two channels together. The -vocal and +vocal cancel out.

I'll keep my eye out for it.

Ralph
The topic has been locked.
Alfred
Junior Boarder
Blog Posts: 0
Forum Posts: 30
Rating: 0ApplaudCriticize
Posted 2 Years, 10 Months ago #3
I've tried this, I can't remember which program of mine did it but I can say it doesn't work. The vocals are still there, just real faint but what it does do is distort the music. So bad you can't even sing along to it.
The topic has been locked.
Bronze Boarder
dongisselbeck
Blog Posts: 0
Forum Posts: 40
Rating: 0ApplaudCriticize
Posted 2 Years, 10 Months ago #4
Dependent on the vocal and if there are any harmonies, parameteric EQ can do the trick as well as anything. there is no way to completely take out a vocal track when mixed. I think the best thing to do would be to find a kareoke (sp?) version of whatever you are looking for.

By the way... Have any of you ever seen the 5 minute cable spook on the kareoke artiest? It is really funny and you should try to find it. I have a copy but have no idea how to post is as it would be a huge file in video....

Danny Taddei Musician's, Writers and Producers resource site:
The topic has been locked.
SWilhelm
Junior Boarder
Blog Posts: 0
Forum Posts: 26
Rating: 0ApplaudCriticize
Posted 2 Years, 10 Months ago #5
Since : > the vocal is usually centered in the stereo mix (equal on both left and right : > channel), It does it by reversing the phase on one channel and then 'adding' : > the two channels together. The -vocal and +vocal cancel out. : > : > I'll keep my eye out for it. : : I've tried this, I can't remember which program of mine did it but I : can say it doesn't work. The vocals are still there, just real faint : but what it does do is distort the music. So bad you can't even sing : along to it.

The main problem here is that, even though the lead vocal is generally centered, the processing on it, especially reverb, will often not be. Thus, even if you are mostly, or even wholly, removing the direct lead vocal itself with this phase trick, the reverb from it may remain behind.

Also, some vocal processing tricks add other elements to what goes to the various sides of the stereo field for the lead vocal. For instance, sometimes I double the lead vocal and then copy the doubled track to an extra track, advancing one of those copies a little and putting the other one back a bit in time to get an overall fatter effect. Thus, the center-panned primary lead vocal would be removed with the phase trick, but the doubled version would not be because the portions in the left and right channels are slightly offset from one another.

One additional problem is that there are other things centered in the stereo
The topic has been locked.

Spread the Word!

Four out of five users would recommend us to a friend. Shouldn't you?
Link to Us    Tell a Friend

Related Posts:

The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Chord Space